Fujikura FSM-60S Fusion Splicer
The FSM-60S fusion splicer sets the standard for core alignment
fusion splicing by incorporating a user-friendly interface with
enhanced features to provide the most rugged and reliable fusion
splicer in the market today. The new rugged construction adds
improved reliability by resisting shock, dust, and rain, and can
withstand a 30 drop test.
The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice
sleeve in 30 seconds,for a total cycle time of only 39 seconds. New
features, such as automatic tube heater operation, user-selectable
clamping method (sheath clamp or fi ber holder system), automated
monitor image orientation, and battery charge capability during
splicer operation provide the end user a productivity tool they can
count on.
New software included provides the ability to download splice data
to a PC for splice data reporting, download splicer operating
software via the internet to maintain peak performance, and
download video images from the splicer to enhance technical
support.
Features
1) Rugged construction providing shock, dust and moisture
resistance
2) Dual monitor position with automatic image orientation
3) Automatic arc calibration and fi ber identifi cation
4) User-selectable fi ber clamping method - sheath clamp or
fi ber holders
5) Auto-start tube heater feature
6) Color LCD display with anti-refl ective coating for
excellent visibility in bright sunlight
7) Simultaneous battery charge and splicer operation Fonsun
Technology
8) Long life battery (up to 160 splice/heat cycles per
charge)
9) Detachable work table incorporated into the transit case
10) Data and video download software included; software
upgrade available via the internet
11) Green friendly-RoHS & WEEE compliant
Specifications
PARAMETER
VALUE
Model
FSM-60S Fusion Splicer
Applicable Fibers
Single-mode (ITU-T G.652), Multimode (ITU-T G.651),
DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter
80um to150um
Coating Diameter
100um to 1,000um
Fiber Cleave Length
8 to 16mm with 250um coating diameter, 16mm with 900um
coating diameter,Fonsun Technology
Typical Average Splice Loss
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with
NZDS
Measured by cut-back method relevant to ITU-T and IEC
standards
Splicing Time
Typical 9 seconds with standard single-mode fiber
Arc Calibration Method
Automatic, real-time and by using results of previous splice
when in AUTO mode, manual arc calibration function available
Splicing Modes
100 preset and user programmable modes
Splice Loss Estimate
Based upon dual camera core alignment data
Storage of Splice Result
Last 2000 results to be stored in the internal memory
Fiber Display
X or Y, or both X and Y simultaneously. Front or rear monitor
display options with automated image orientation
Magnification
300X for single X or Y view, or 187X for X and Y view
Viewing Method
Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition
0 to 5,000m above sea level, 0 to 95%RH and -10 to 50
respectively
Mechanical Proof Test
1.96 to 2.25N
Tube Heater
Built-in tube heater with 30 heating modes; auto-start
function
Tube Heating Time
Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3
(40), 35-55 seconds with Fujikura micro sleeves ,Fonsun Technology
Protection Sleeve Length
60mm, 40mm, micro
Splice/Heat Cycles
Typical 160 cycles with power save functions activated
Power Supply
Auto voltage selection from 100 to 240V AC or 10 to 15V DC
with ADC-11, 13.2V DC with BTR-08 battery
Terminals
USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin)
for HJS-02/03 and SH-8 tube heater
Wind Protection
Maximum wind velocity of 15m/s. (34 mph)
Dimensions
136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Weight
2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs) with
BTR-08 battery
Ordering Information
DESCRIPTION
PART #
FSM-60S Fusion Splicer (machine only)
Includes: ADC-13 A
